Wengart Heating Thermostats WG02B05,7-day Programmable 3A Radiant Floor Heating

  • €23,71
    Precio unitario por 
Los gastos de envío se calculan en la pantalla de pago.


Wengart Weekly circulation digital programming thermostat with LCD touch screen has 6 events everyday, Provide energy-saving and comfortable living environment,easy to install and convenient to use.Manual mode and programme mode could be selected.Back light for easy viewing.The thermostat is recommended for control of electric heating devices or on/off valve actuator used in hydronic floor heating.Suitable for almost all electric under floor heating systems.Fits for 60 mm square, 86*86 mm or European round models.

1、This programmable floor heating thermostat is compatible with water floor heating systems, flush-mounted, compatible with 86 European cassettes, and CE certified. Output AC230V 3A, support normally open normally closed electric heating actuator, give you the control you need to save money and energy and maximize comfort.

2、The room thermostat can freely choose a built-in air sensor or a 3m external sensor probe. When using an external sensor, it is suitable for a 3950, 10K=25°C sensor

3、This room thermostat has a power-off memory function, which can restore the original operating state when the power is turned on again after a power failure or keep the power-off state after being turned on again.

4、The room thermostat can be set to a temperature range of 1-70°C, with manual mode, programming mode and holiday mode to meet your unique needs.

5、The room thermostat has a one-week programming function, which can automatically switch to the temperature you set within the set time. There are 6 fixed time periods on working days and 2 fixed time periods on rest days. At the same time, you can freely choose 5 days or 6 days on working days or 7 days. Gives you the freedom to plan your weekly schedule and helps you save on energy bills.

6、The room thermostat can be configured to automatically turn off the heating when it detects a rapid drop in room temperature (such as when a window is opened) to avoid wasting energy.

7、The room thermostat has a temperature calibration function. When the measured temperature is far from the actual room temperature, it can be calibrated by 1°C.

8、The digital thermostat has an LCD display, and the large screen displays the room temperature, set temperature, current heating status and current time, which is convenient for understanding the current status of the thermostat.

9、The room thermostat has a white/blue backlight, which lights up when the thermostat is operated, and automatically turns off after 10 seconds of no button operation (the time can be set from 5 to 30 seconds), which is convenient for setting the thermostat in a dark environment.

10、The room thermostat has a power-off memory setting parameter function, and the information can be saved for a long time in the power-off state after the parameter setting.

11、The room thermostat has the function of starting temperature difference, and the starting temperature difference can be adjusted between 0.5 and 5°C. For example, if the set temperature is 20°C and the starting temperature difference is 1°C, the thermostat will turn off the heating when the room temperature is 21°C and above, and turn on the heating when the room temperature is 19°C and below.

12、The room thermostat has an anti-freezing function. In the off state, if the measured indoor temperature is lower than 5°C (1-10°C can be set), the heating will be turned on automatically to prevent the water pipe from freezing

13、The room thermostat can be configured to turn on the descaling function. After it is turned on, the water, electricity and heating system will not run for 300 hours, and it will be turned on for a period of time to prevent dirt from clogging the water pipes.
Specification:
•Power Supply Voltage: AC90~240V 50/60Hz
•Power Consumption: 2W
•Setting Range: 5~70℃(can adjust to 20-70℃)
•Switch Differential: 0.5~5℃ adjustable (factory setting±1℃)
•Ambient Temperature: -5~50℃
•Ambient Temperature display accuracy:±0.5℃
•Temperature control accuracy: ±0.5℃
•Measured Range:1~70℃
•Inside Sensor: NTC 10k @25℃
•Protective Houseing: IP20
•Housing Material: Anti-flammable PC
•Wiring terminal: one terminal can be connected to 2*1.5mm2 or 1*2.5mm2 wire at most
•Package Content: 1 x Thermostat,2 x Screws,1 x Manual
•Dimensions :86mm×86mm×27mm
•Colour:White
•Weight: 234g
•Installation hole distance: 60mm
•Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.

Features:
•Digital Room Thermostat Automatically obtain the surrording temperature,Precise control of the temperature you want,temperature control accuracy of up to 0.5 ℃,Set temperature adjustment by touching the buttons
•Free to choose Manual mode/Programme mode/Holiday mode according to different applications
•Write a setting program through the programmable thermostat to make the thermostat work according to the setting rules,6+1,5+2 and 7 days weekly schedule of 6 times period,you can do DIY programming,to provide you with maximum convenience in different situations
•Room Thermostat Timer:You can adjust the current time after entering the clock calibration interface,You can calibrate the room measurement temperature
•Two sensors:You can choose between built-in or external sensors with this water underfloor heating thermostat
•Power failure memory:No need to worry about a sudden power failure,smart thermostat will remembere all settings
•The heating thermostat bandwidth can be adjusted from 0.5 to 5°C. For example, if the bandwidth is set to 1°C and the set temperature is 20°C, the heating will be turned off at 21°C and above, and turned on at 19°C and below.
•Child lock:Keypad locking function is designed to lock the room thermostat to avoid misoperation by children
•LCD display digital thermostat with backlight,simple to operate and easy to read even in the dark
•More functions can be set by entering the extended menu in the off state