Wengart Room thermostat WG808, 10A,Water Heating

Wengart Heating thermostat with touch button has elegant appearance, one face design, anti-scratch.Control the thermostat by big touch button.The thermostat is recommended for the control of  on/off valve actuator in hydronicunderfloor heating. Manual or energy saving operation mode can be selected through the DIP switch.For the control of warm-water (floor) heating systems used in Commercial buildings,Residential buildings, Light industrial buildings...

1、This floor heating thermostat is compatible with water floor heating systems, embedded installation, suitable for 86 European cassettes, CE certified. Output AC230V 10A, giving you the control you need to save money and energy and maximize comfort.

2、The room thermostat adopts touch buttons with buzzer feedback, and the temperature range can be set from 5-95°C. After power-on, you can set the temperature you need without any other operations. It is suitable for people who do not need complex functions.

3、The room thermostat has a temperature calibration function, and when the measured temperature differs greatly from the actual room temperature, it can be calibrated by 1°C

4、The room thermostat has a backlight display, and it will automatically darken after 30s of no operation, which is convenient for setting the thermostat in a dark environment.

5、The room thermostat can freely choose built-in sensor or external sensor, when using external sensor, it is suitable for 3950, 10K=25°C sensor

6、The room thermostat has a power-off memory function, and the information can be saved in case of power-off after parameter setting.

7、The room thermostat has an anti-freezing function. In the off state, if the measured indoor temperature is lower than 5°C (1-5°C can be set), the heating will be turned on automatically to prevent the water pipe from freezing.

8、The room thermostat has the function of starting temperature difference, and the starting temperature difference can be adjusted between 1-5°C. For example, if the set temperature is 20°C and the starting temperature difference is 1°C, the thermostat will turn off the heating when the room temperature is 21°C and above, and turn on the heating when the room temperature is 19°C and below.

9、The room thermostat can choose to control the normally open or normally closed electric heating actuator, and it can be connected to the corresponding port as needed.

Specification:
Voltage: AC230V 50/60Hz
Ambient temperature display accuracy: ±1℃
Temperature control accuracy: ±1℃
Power Comsuption: 2W
Maximum Resistive Load: 10A
Display: LED
Setting Range: 5～35℃
Ambient temperature: -5～50℃
Sensor: NTC internal/external sensor
Package Content: 1 x Thermostat,2 x Screws,1 x Manual
Dimensions: 86 mm x 86 mm x 39mm
Shell Material:PC+ABS
Protective housing: IP20
Notes:
1. Due to the different monitor and light effect, the actual color
of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.